Pengaruh Lamanya Perendaman Terhadap Absorpsi, Ketahanan Aus, dan Kuat Tekan Paving Block
DOI:
https://doi.org/10.30595/pspfs.v6i.849Kata Kunci:
Paving Blocks, Soaking QualityAbstrak
Paving blocks are considered advantageous over other road surfaces, and it is undeniable that paving blocks are an alternative road surface whose quality is still affected by water flooding. The objective of this study was to determine the effects of soaking time and age of paving blocks in terms of absorption, wear resistance, and compressive strength. The paving blocks used were manual (Holland) brick models obtained from Banyubiru and mechanical ones obtained from PT Pohon Cemara Semarang. The variations soaking times were 0, 12, 24, 36, 48 (hours) for 7, 14, 21, 28 (days) old pavers. The tests conducted were absorption, wear resistance, and compressive strength tests of paving blocks, carried out in the UNISSULA civil engineering laboratory. The results of absorption tests manual and machine paving block showed that value of the absorption test increased with increasing soaking time. The results of wear resistance of manual and machine pavers show that the untreated samples had a lower wear value and all test results met the requirements of SNI 03-0361-1996 Quality A. The maximum compressive strength of manual paving blocks at 28 days of age without treatment is 13.334 MPa. The maximum compressive strength of machine-made pavers is 25.297 MPa for paving blocks without immersion.
Referensi
Anggoro, M., R., T. (2022). “Dua Kali Diperbaiki, Jalan di Bundaran Puri Anjasmoro Rusak Lagi”. Diakses tanggal 8 Agustus 2022 dari https://radarsemarang.jawapos.com/berita/jateng / semarang/ 2022/04/05/ dua-kali-diperbaiki-jalan-di-bundaran-puri-anjasmoro-rusak lagi. Jawa Pos.
Chen, X., Huang, W., and Zhou, J. (2012). Effect of Moisture Content on Compressive and Split Tensile Strength Concrete. Indian Journal of Engineering and Material Sciences, 19, p.427-435.
Anistya, B., F. (2018). Tugas Akhir. Analisis Pengaruh Kelembaban Benda Uji Terhadap Kuat Tekan dan Kuat Tarik Belah Beton Mutu Tinggi Dengan Metode Destructive dan Non Destructive Tests (Compression Testing Machine dan Hammer Test). Universitas Mataram. Mataram.
Departemen Pekerjaan Umum. (1971). Peraturan Beton Bertulang Indonesia 1971 (PBI 1971). Yayasan Lembaga Penyelidikan Masalah Bangunan, Bandung.
Sebayang, S., Diana, I., W., dan Purba, A. (2011). Perbandingan Mutu Paving Block Produksi Manual dengan Produksi Masinal. Jurnal Rekayasa, 15(2).
Bata Beton (Paving Block). (1996). SNI 03:0691. Badan Standardisasi Nasional. Jakarta.
Mahdiana, N., Arifi, E., and Nurlina, S. (2018). Pengaruh Void Ratio dan Permeabilitas Beton Terhadap Kuat Tekan Beton Porous dengan Variasi RCA. Jurnal Mahasiswa Jurusan Teknik Sipil, 1(1), p.353-363. https://doi.org/10.21776/ub.rekayasasipil.2018.012.02.9
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2023 Proceedings Series on Physical & Formal Sciences
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
Artikel ini berlisensi Creative Commons Attribution 4.0 International License.